Transfering MP3/WAV to Boss Micro BR

Page numbers refer to Boss Micro BR owners manual.

-Pg 99.
-Use the USB cable to connect the MBR to your computer.
-Turn on the MBR
-The computer should create a drive/folder for the MBR.
-Open the folder. There will be a folder inside that one labled MP3 folder.
-Drag-n-drop your MP3 or WAV file on top of the MP3 folder.
This will copy your MP3/WAV file to the MBR.

If you just want to listen or play along with the MP3/WAV, you're done.

Import MP3/WAV into a new song.

-Pg 42
-Make sure you're in normal mode (ie not bounce, master or MP3 modes)

-Pg 28 Create a new song
-[Utility] [SNG:TR1] [NEW:TR2] [EXE:TR4] [EXIT]

-Pg 108 Track import
-[Utility] [TRK:TR2] [►:cursor] [IMP:TR1]
-Use cursor ◄► and +/- keys to select the MP3/WAV file to import.
-[Next:TR4]
-Use cursor ◄► and +/- keys to select the import destination track.
For stereo, select TR12 or TR34
-Select time or measure to import to.
[TIM:TR1] or [MEA:TR2] (and +/- keys to adjust location)
-[EXE:TR4] [YES:TR4]
-Wait

-Press [EXIT] several times to return to main window.

-Pg 41 Enable stereo link
-[TR1]
-Use cursor ◄► keys to move to 'pan' selection
-Simultaneously press [TR1][TR2] or [TR3][TR4] to enable (or disable) stereo link. The "=" is shown for parameters that are stereo linked.
The pan parameters should be L50 and R50 for the stereo tracks you're using. If not, adjust with +/- keys.